Sensorex SX3320 serie strain gauge conditoner with threshold

Sensorex signal conditioners 
  • Signal conditioner for strain gauge which can accept very low bridge resistance values ( 80 ohm)
  • Gain and zero can be easily regulated by dip-switch and potentiometer. Excitation can be either 5 or 10 volts
  • Output is available in several formats : 0/10 V, ± 10 V or 4/20 mA
  • Bridge can be hooked up in either 4 or 6 wire configuration
  • 6 wire configuration will avoid any voltage loss between supply and the strain gauge due to long cable length
  • Module will also detect threshold limits, wire break of the sensor and supply loss
  • Failure signal is given through a relay
  • Two different thresholds can be easily set by potentiometers accessible from the front of the unit
  • Unit come in a PA PHOENIX polyamide housing, EM type, and can be clipped onto any DIN EN line (norm EN 50022)
         

Kontakt Hydex vedrørende Sensorex SX3320 serie strain gauge conditoner with threshold

Type    Strain gauge conditoner with threshold
Output 0-10 V, ± 10 V or 4 – 20 mA
Power supply 24 VDC
Bridge excitation 5 or 10 VDC
Bridge connection 4 or 6 wires
Temperature range 0°C ... +70°C
Protection IP20
For mer informasjon Klikk her --- Datablad

Kontakt Hydex vedrørende Sensorex SX3320 serie strain gauge conditoner with threshold

 
Page rendered: 05.06.2020 12:19:17
OXX.Authorization.User.Username: Semitronic_anonym (NO)